Answer 1: It has combined more than 10 kinds of rare natural mineral stone and mineral elements to make use of high technology to extract until nanometer is attained, and then end product is gotten after burnt at temperature as high as 1,2000C. This product has stable quality and is radiated with very high energy. Besides, it has made use of the synthetic radiation technique of PHOTOCATALYST to focus the energy and make it stable and durable. The principle of such technique is different from general far infrared technical principle.
答1：『BT-X环保节油器』主要成份如SiO2 (二氧化硅)及Fe2Fe3C15等结合数十种稀有天然矿石矿物元素，利用高科技萃取至奈米级（首创46.4纳米技术，经台湾工研院及国防部中科院等单位检测都有相当好的效果），经1,200℃高温烧却而成，再利用光和电的合成放射技术让能量聚集，质量稳定能放射极高的能量而且持久，能使油分子微细化、提高油分子燃点、提升汽油燃烧率。
Wednesday, September 17, 2008
Q2: What is the character of the “BT-X Fuel Saver” ? 问2：【BT-X环保节油器】特征为何？
Answer 2: It has the heat transmitting reaction and it may release ”universal natural energy” with average radiation rate 91.4%. Its vibration frequency is 299,000kc/second, which is a radiation object that may release very high energy.
答2：爱因斯坦的方程式：【E=MC2】【能量=质量X 光速平方】。能量是可测的，爱因斯坦能量不灭定律-凡是物质都有能量；能量就是气场，能量的光类似远红外线的光，但它的波段频率与远红外线稍有不同，这种技术原理不同于一般的远红外线技术原理。BT-X环保节油器能产生热传导反应，平均放射率91.4％，震动频率为299,000kc/秒是一种能释放出相当高能量的放射实体。
答2：爱因斯坦的方程式：【E=MC2】【能量=质量X 光速平方】。能量是可测的，爱因斯坦能量不灭定律-凡是物质都有能量；能量就是气场，能量的光类似远红外线的光，但它的波段频率与远红外线稍有不同，这种技术原理不同于一般的远红外线技术原理。BT-X环保节油器能产生热传导反应，平均放射率91.4％，震动频率为299,000kc/秒是一种能释放出相当高能量的放射实体。
Q3: What is the difference between micrometer and nanometer ? 问3：微米与奈米有何区别？
Answer 3: One micrometer is 10-6 meter (1/1000000 meter)
One nanometer is 10-9 meter (1/1000000000 meter). Their character is that apply very fine single atom and molecule to make material. The breakthrough point of the “BT-X Fuel Saver” is that it has upgraded from micrometer up to nanometer to release higher radiation energy and it is stable, efficient and durable!
答3：1微米μ m是10-6米百万分之一公尺1奈米 NaNo是10-9米十亿分之一公尺，奈米特性是微细以单个原子、分子制造物质，BT-X环保节油器突破点是由微米级提升至奈米级（首创46.4奈米技术，经台湾工研院及国防部中科院等单位检测都有相当好的效果），所放射出来的能量不但高且稳定效能又非常持久！
One nanometer is 10-9 meter (1/1000000000 meter). Their character is that apply very fine single atom and molecule to make material. The breakthrough point of the “BT-X Fuel Saver” is that it has upgraded from micrometer up to nanometer to release higher radiation energy and it is stable, efficient and durable!
答3：1微米μ m是10-6米百万分之一公尺1奈米 NaNo是10-9米十亿分之一公尺，奈米特性是微细以单个原子、分子制造物质，BT-X环保节油器突破点是由微米级提升至奈米级（首创46.4奈米技术，经台湾工研院及国防部中科院等单位检测都有相当好的效果），所放射出来的能量不但高且稳定效能又非常持久！
Q4: Will it clog the fuel hose if the “BT-X Fuel Saver” is immersed in the fuel tank ? 问4：【BT-X环保节油器】泡在油箱里会阻塞油管吗？
Answer : No! Because there is a filter screen at the front end of the fuel absorption pump inside the fuel tank of the car.
4：不会！因为车子油箱里吸油帮浦的前端都有滤油网。
4：不会！因为车子油箱里吸油帮浦的前端都有滤油网。
Q5: Will it dissolve if the “BT-X Fuel Saver” is immersed in the fuel tank for longtime ? 问5：【BT-X环保节油器】长久浸泡在油箱里会溶解吗？
Answer 5: No! The element carrier of the “BT-X Fuel Saver” is composed of various mineral elements, which have gone through 1,2000C high heat burning to get very hard body and never dissolve.
答5：不会！【BT-X环保节油器】组件载体是多种矿物元素结合，并经1,200°C高温烧却而成，实体坚硬，永不溶解。
答5：不会！【BT-X环保节油器】组件载体是多种矿物元素结合，并经1,200°C高温烧却而成，实体坚硬，永不溶解。
Q6: Will it deteriorate the fuel if the “BT-X Fuel Saver” is immersed in the fuel tank for long time ? 问6：【BT-X环保节油器】长久浸泡在油箱里会使汽油变质吗？
Answer 6: No! The element carrier of the “BT-X Fuel Saver” is made from pure natural mineral elements, which will go through physical, not chemical function so the fuel will not deteriorate.
答6：不会！BT-X环保节油器组件载体是纯天然矿石矿物元素所制造的是物理作用而非化学作用，所以汽油不会变质。
答6：不会！BT-X环保节油器组件载体是纯天然矿石矿物元素所制造的是物理作用而非化学作用，所以汽油不会变质。
Q7: Will it cause any negative impact on the mechanism and engine of the car if the “BT-X Fuel Saver” is used ? 问7：用【BT-X环保节油器】对车辆机件和发动机会造成不良影响吗？
Answer 7: NO! Because the energy released from the element carrier is simply physical phenomena, therefore, it will not cause any negative impact on the mechanisms and engine of the car.
答7：不会！因为组件载体所释放的能量纯为物理现象，对于车辆机件和发动机不会造成任何不良影响。
答7：不会！因为组件载体所释放的能量纯为物理现象，对于车辆机件和发动机不会造成任何不良影响。
Q8: Why “BT-X Energy Saver” can be used for 5 years ? 问8：为何【BT-X环保节油器】能使用5年？
Answer 8: The equation of Einstein is: E = MC2; Energy Mass X Speed of Light of the vacuum, which assumed the energy of the material exists all the time, energy is semi-permanent. With our special manfacture process “BT-X Fuel Saver” is good to use for 5 years.
答8：爱因斯坦的方程式：【E=MC2】【能量＝质量X 光速平方】爱因斯坦物质能量不灭定律，能量是半永久性的，因此，BT-X环保节油器能使用5年。
答8：爱因斯坦的方程式：【E=MC2】【能量＝质量X 光速平方】爱因斯坦物质能量不灭定律，能量是半永久性的，因此，BT-X环保节油器能使用5年。
Q9: When the second “BT-X Fuel Saver” is installed after 5 years, should the first one be taken out ? 问9：5年后第二次要置入【BT-X环保节油器】第一次置入的须取出吗？
Answer 9: Not necessary. Because the “BT-X Fuel Saver” is small and it will not take much space.
答9：不用取出。因为BT-X环保节油器体积很小不会占太大空间。
答9：不用取出。因为BT-X环保节油器体积很小不会占太大空间。
Q10: What is the difference between the “BT-X Fuel Saver” and the fuel saver sold in the market ? 问10：【BT-X环保节油器】与市售省油器的差异？
Answer 10:
The fuel saver sold in the market can be classified into the following categories technically:
1. Dissolution method : Direct install in the fuel tank to raise the octane value, which is of chemical function.
2. Electro flux method : to upgrade the electric power of the spark plug.
3. Magnetic power method : The magnetic at N and S poles are attracted to each other to change the fuel molecule alignment to allow the positive/negative charge to align neatly.
4. Turbo method : Make use of turbo air exhausting system principle to exhaust the wasted air from the burning chamber.
5. Energy reaction method : Change the fuel molecule structure and make the fuel molecule finer.
Hereunder are the operation methods for energy reaction method to save fuel :
(1) Replace the fuel lid.
(2) Cut off the two ends of the fuel hose and fuel saver, and then connect to allow the fuel pass through the fuel saver.
(3) Wind the fuel saver onto the fuel hose (indirect reaction).
(4) Clip the fuel saver on the fuel hose (indirect reaction).
Summary of the above various way, the shortcoming are :
1. Uneasy to install.
2. The effect of the indirect reaction is no good.
3. The dissolution method requires constant consumption.
答10：市售省油器就技术面而言可分为下列几种：
1 . 溶解法-------直接置入油箱提高辛浣值是【化学作用】
2 . 电通法-------提升火星塞之电力。
3 . 磁力法--NS两极磁力相吸改变油分子排列让正负排列整齐
4 . 涡流法---利用涡流排气系统原理，让燃烧室废气排出。
5 . 能量感应法------改变油分子结构，让油分子微细化。
能量感应法省油方式可分为下列几个操作方式：
(1) 更换油箱盖。
(2) 切断油管与省油器两端相接让汽油经过省油器。
(3) 将省油器缠绕在油管上。【间接感应】
(4) 将省油器夹在油管上。【间接感应】
综合以上多种方法之缺点为…
1. 安装不易。
2.【间接感应】效果不佳。
3.【溶解法】需经常性的消费。
The fuel saver sold in the market can be classified into the following categories technically:
1. Dissolution method : Direct install in the fuel tank to raise the octane value, which is of chemical function.
2. Electro flux method : to upgrade the electric power of the spark plug.
3. Magnetic power method : The magnetic at N and S poles are attracted to each other to change the fuel molecule alignment to allow the positive/negative charge to align neatly.
4. Turbo method : Make use of turbo air exhausting system principle to exhaust the wasted air from the burning chamber.
5. Energy reaction method : Change the fuel molecule structure and make the fuel molecule finer.
Hereunder are the operation methods for energy reaction method to save fuel :
(1) Replace the fuel lid.
(2) Cut off the two ends of the fuel hose and fuel saver, and then connect to allow the fuel pass through the fuel saver.
(3) Wind the fuel saver onto the fuel hose (indirect reaction).
(4) Clip the fuel saver on the fuel hose (indirect reaction).
Summary of the above various way, the shortcoming are :
1. Uneasy to install.
2. The effect of the indirect reaction is no good.
3. The dissolution method requires constant consumption.
答10：市售省油器就技术面而言可分为下列几种：
1 . 溶解法-------直接置入油箱提高辛浣值是【化学作用】
2 . 电通法-------提升火星塞之电力。
3 . 磁力法--NS两极磁力相吸改变油分子排列让正负排列整齐
4 . 涡流法---利用涡流排气系统原理，让燃烧室废气排出。
5 . 能量感应法------改变油分子结构，让油分子微细化。
能量感应法省油方式可分为下列几个操作方式：
(1) 更换油箱盖。
(2) 切断油管与省油器两端相接让汽油经过省油器。
(3) 将省油器缠绕在油管上。【间接感应】
(4) 将省油器夹在油管上。【间接感应】
综合以上多种方法之缺点为…
1. 安装不易。
2.【间接感应】效果不佳。
3.【溶解法】需经常性的消费。
Subscribe to:
Posts (Atom)
